Sewing instructions for a loop

Normal Scarves can get a bit boring in the long run. A fancy variant for men, women and children is a loop. This is a scarf that is pulled over the head in one piece. These sewing instructions are for a women's loop.

Sewing instructions - a loop made of scraps of fabric

A loop in a patchwork look is extravagant and unique. This is made from small scraps of fabric and sewn in the same way as an ordinary loop. All you need is a lot of different scraps of fabric and a little time. If possible, the fabrics should all be made of the same material so that the loop does not warp during washing.

1. Cut the pieces of fabric into equal-sized squares. These can be 12 x 12 cm or larger.
2. Sew all the pieces together until you have an even rectangle. This rectangle must have a width of 90 cm and a length of 1 meter.
3. Make sure to overcast the seams with zigzag stitches, otherwise the fabric would very easily come apart and the seams would eventually open.
instagram viewer


Loop scarf - sewing instructions that explain how to turn

Actually nobody needs sewing instructions like a loop scarf to be sewn ...

4. It is possible that your rectangle does not have the exact dimensions required for the loop. This can be easily corrected by cutting the patchwork fabric to size.

Sew the loop scarf

Now you can with the sew of the loop. In these sewing instructions, a simple loop is described - without twists or squiggles.

1. Now fold the fabric lengthways in the middle. The inside must be on the outside - that is, on the "left" side.
2. Sew the folded fabric together on the long side with small stitches and then overcast the seam with zigzag stitches.
3. Now you have a hose. You only have to turn it exactly halfway, just reach into it and carefully pull the other end through. The outer edges should lie on top of one another.
4. Sew these outer edges together all around, but leave the seam a little open (approx. 8 cm).
5. Reach into this opening with one hand and turn the hose. In doing so, pull the inside of the scarf outwards through the open area of ​​the seam.
6. Now you have the almost finished loop in front of you, the seams should now be invisible on the inside of the hose.
7. Fold in the open end a few millimeters and sew it up with a needle and thread. You can also simply stitch over it with the machine, it stays the same.

Of course, you can also create a loop from any fabric or stretch using these sewing instructions.