Make curtains for sloping ceilings yourself
A skylight can become a real problem if you want to decorate it with a curtain. You can buy ready-made curtains and blinds for the sloping ceiling, but these are mostly for Complicated rail guides are designed and you first have to make some drill holes makes necessary. These curtains are also more expensive. But if you do not want to drill into your roof window and have your own idea of your curtain for the sloping roof, then you can also sew it yourself, which is not as difficult as it sounds at first, as you will see in these instructions will.
What you need:
- Tape measure
- material
- sewing machine
- Pins
- Curtain rods
You need a sewing machine for your curtain and you should have one before you go out to buy fabric Have a clear idea of what your curtain should look like and what dimensions you need to avoid unnecessary trimming avoid.
How to plan a curtain for a sloping window
- Measure the width of your window, this is necessary so that you buy the correct width of fabric. You can easily correct the length, but if the fabric is much too wide for the window, you would have to use the Use the sewing machine to sew the entire length that you have cut off so that the fabric does not stretch separates.
- Consider beforehand whether the curtain should have folds or if it should be attached to the pane rather smoothly.
- Would you like an opaque fabric that also doubles as sun protection or just an airy, decorative fabric?
- Once all of these questions have been answered, you also need the right rods for your curtain. Curtain rods that do not fit together are particularly suitable for sloping ceilings and for attaching without drilling holes can only be adjusted in length, but also clamped to the window by a spring inside will. Rubber plugs on the ends protect your window frame from scratches.
Triangular windows are rarely found, so it can be difficult to ...
How to make your window hangings especially for the sloping roof
- As with all other curtains, you need a tunnel through which you can later lead the rod. The special thing about sloping ceilings is that you need two tunnels for the curtain, one above and one below, so that your curtain also covers the window.
- Before you start with the sew get started, measure 10 cm each for sewing on the top and bottom side. Fold in the fabric and first secure it with pins.
- Run the rods through and tentatively attach the curtain to the window. Now you can see whether the length is already correct, because if the curtain in the sloping ceiling is too long, it will sag ugly.
- When everything is the way you want it, use the sewing machine to sew the tunnels, pulling the pins out of each section that is sewn so you don't sew at an angle.
- If the tunnels are now sewn, you can go through the poles again and attach the curtain to the window frame. If you want to pleat the fabric, do not place the bars too close to the window pane.
As you can see, it is quite possible to make a curtain for the sloping ceiling yourself. In addition, you can let your own creativity run free and are not dependent on ready-made models.
How helpful do you find this article?