How do I find a hole in the pond liner?

instagram viewer

A garden pond enhances the atmosphere and creates a cozy ambience. Fish lovers can also breed fish in it. A pond can have different sizes and can also be laid out with different materials. Nevertheless, a pond liner is hardly omitted because it holds the water together. Unfortunately, the foils are not strengthened against all odds. PVC pond liner in particular tears or can get holes very quickly. The task here is to find the hole and to repair it properly.

The pond liner for the garden pond must be tight.
The pond liner for the garden pond must be tight.

What you need:

  • bucket
  • small tub
  • small net
  • brush

Find the hole

  • The hole is certainly not easy to find. To do this, you should first use the pond remove from the water and plants. If it contains fish, it is advisable to fill a bucket or a small tub with pond water beforehand. The fish can withstand it for some time.
  • Then the pond liner is cleaned with small, non-pointed brushes. The cleaning agents should never be sharp-edged, as this will avoid further holes. You should also not use detergent. Clear water is the best alternative.
  • Now you can examine the slide closely. It is best to choose nice weather for this, as the effects of light make a hole easier to see.
  • A drop of condensed milk is also good when finding the hole. You can put two drops in the water and see where it floats. The direction of the hole can already be identified.

Correctly repair the pond liner

  • Once you've found the hole, you may be able to repair it. Still, it depends on the size.
    • Sticking pond liner - this is how you repair damage

    There are several ways that your pond liner can be damaged. A difficult one ...

  • If the holes are rather small, they can be glued with a small piece of foil. For this you get special glue, which you carefully apply to the foil. The glue is also not harmful and can be used without hesitation. However, the package insert should be observed.

Hole in PE pond liner

  • In contrast to the PVC film, the PE film is significantly more resistant to UV light and other environmental influences. You can use this on all types of ponds.
  • Usually the tracks are offered from a width of six meters. If the dimension is greater than a certain length, then individual strips are welded together. The sizes can be adjusted individually.
  • Depending on the size, the lengths can also be purchased individually and then glued together with the appropriate adhesive. However, it must be ensured that all tracks are tightly united with one another.

How helpful do you find this article?

click fraud protection