Use leveling compound for wooden floors correctly
If you have old uneven wood floors in the house, you don't have to remove them to put tiles or other coverings on them. You can simply spread a leveling compound for wooden floors over it.
Make sure you only use leveling compounds that are designated for wooden floors, because wooden floors work, which means they move minimally. For this reason you need an elastic leveling compound so that it does not tear. If you use a rigid material on it, such as Tiles, you also need a fabric so that the movement of the wooden floor does not destroy the tiles.
Leveling compound is used for wooden floors
- Before you begin leveling any bumps, be sure to inspect the floor for any screws or nails sticking out. Remove these or drive them in wood into it.
- Since all leveling compounds are mixed with water, you must protect the wooden floor from this. To brush Cover the wooden floors with a water-repellent agent to prevent the water from the leveling compound from penetrating the wood. The wood would swell and would not be able to dry under the leveling compound, so it would begin to rot.
- If you want to lay a rigid covering such as tiles on the wooden floor, you must now connect a reinforcement fabric to the wooden floor. If elastic material such as carpeting or PVC is planned, this is not necessary, even if you are insane Laminate or laying parquet, there is no need to use a fabric under the leveling compound.
- Now mix the leveling compound for wooden floors according to the instructions. This usually has to have the consistency of cream so that it can flow smoothly over the floor. Do not use the compound too sparingly with a planned tile covering, even if no unevenness has been leveled out because this mass protects the tiles from stress cracks caused by wooden floors underneath suffer.
- Since you have to reckon with a layer thickness of about 5 to 10 mm, make sure that there are no problems with it Doors can give. Hang them up for security. It could also happen that the mass could flow into other rooms. Simply glue angle profiles made of plastic into the door openings so that the compound cannot flow out. Since you have to glue these profiles to the floor of the adjoining room, it comes down to the Underground at. Hot glue is suitable for smooth surfaces and can be removed without a trace with ice spray. In the case of carpeted floors, it is better to nail the strips on and clamp a thin rubber profile underneath.
- Always pour the leveling compound for wooden floors in one go without allowing any part of the area to harden. Start in a corner of the room opposite the entrance. You need to be able to leave the room without stepping on the crowd. Make no mistake, because you may not enter the room for a few days, depending on the layer thickness of the leveling compound for wooden floors.
Cleaning wood - this is what you should keep in mind
Before cleaning wood, there are a few things you should do to ensure that you can continue to enjoy the ...