Lay laminate on PVC

instagram viewer

If you want to lay laminate on PVC, you should consider a few things. Surely it would be very annoying if the newly laid floor covering was damaged.

Prepare the PVC on the surface

What to Consider When You Laminate on PVC want to lay, is described in the following instructions. You should make sure that your PVC is in good condition so that it can be used as a base for laminate.

  1. Before you can lay laminate on PVC, you should peel off the PVC with a long aluminum batten. You can use this method to remove any air bubbles from under the PVC. When that's done, you should hand scan all of the PVC to see if your floor is dry. There must be no moisture under the laminate afterwards.
  2. Now you should measure the room in order to know how much laminate and impact sound insulation you have then have to buy at your trusted hardware store so that you can lay the laminate on the PVC can.
  3. Then you should vacuum the laminate with a vacuum cleaner and then clean it properly. After the floor has dried again, you can lay the impact sound insulation. You should buy individual panels as impact sound insulation, which you then attach one after the other to the PVC with a little glue.

The laminate is laid

  1. When the impact sound insulation has been glued to the PVC, you can lay the laminate. Lay the first strip of laminate directly along the wall. Use small wedges to create an expansion joint between the wall and the laminate strip. The laminate strips are inserted into one another and cut to fit at the end of a row.
    2. Lay the laminate yourself - prepare the substrate properly

    If you want to lay your laminate yourself, there are a few things that you can do with the ...

  2. The piece left over from the cut to size can be used to start the next row. This ensures that the rows are staggered to one another. In the second row, you first put the laminate strips into each other and then the spring becomes of the second row inserted into the groove of the first row and lightly with a hammer compressed.
  3. So you can then lay one row after the other until the room is covered. Thanks to the PVC and the impact sound insulation, you should have an ideal insulation of the floor. If the laminate has laid properly after a few days, you can replace the wedges with small strips of cork.

Be careful not to use too much glue when gluing.

click fraud protection