Lay terrace slabs on concrete

instagram viewer

If you have a concrete floor on your terrace that you would like to cover with slabs, you should lay terrace slabs on top of your concrete.

Lay patio slabs on concrete.
Lay patio slabs on concrete.

What you need:

  • Aluminum spirit level
  • Terrace slabs
  • Rubber mallet
  • Bucket of filler
  • large spatula
  • damp rag
  • 4 ropes
  • Mason Bucket
  • 5 buckets of tile adhesive
  • Notched spatula
  • 2 bags of grout
  • drilling machine
  • Agitator

How to lay terrace slabs

Here you will find instructions for laying terrace slabs on your terrace, which is enclosed by small walls.

  1. Before you can start laying the terrace slabs on concrete, you should measure the terrace exactly. Depending on the size of your terrace, you should then also choose the size of the terrace slabs. The size should be chosen so that you don't have to cut a plate.
  2. Since you have concrete as the base, you can use the patio slabs just like Tiles Fasten with tile adhesive and then grout. So take that into account when choosing the size of your patio slabs. First of all, you should first check your terrace for unevenness with the spirit level. If there are large bumps, you should repair them with filler.
  3. If your exterior walls along your patio are not straight, you should use ropes. At a distance of 2 mm to 3 mm from the walls, these ropes provide a stop for the terrace stones and should be 100% straight.

How to lay flooring on concrete

  1. Now lay the first row of terrace slabs on the concrete of your patio. To do this, spread the tile adhesive along the attached rope and press in the terrace slabs. How to lay one panel next to the other. Joint stars are inserted as spacers between the terrace stones. The joint stars also determine the width of the joints that you then have to joint.
  2. Laying terrace slabs - instructions

    Terrace slabs, both for indoor and outdoor use, are used in ...

  3. Lay all the terrace slabs on the concrete of your terrace until the patio is completely covered. Then you should let the glue dry for a day. Now the tile mortar is mixed with a little water in a masonry bucket. After mixing, spread the grout into the joints. Should any of the mortar spill on the terrace stones, you should remove it immediately with a damp cloth.
  4. Let the grout set a little, then wipe the grout with a damp rag so that you reach an even height. Repeat this until you are satisfied with the result. After the grout has dried after a day, you can step on your terrace slabs laid on concrete.

When laying, you should constantly measure with the spirit level and, if necessary, readjust with the rubber mallet.

How helpful do you find this article?

click fraud protection