What are window reveals?
Of course, if you're thinking of swapping out your windows, do some research. Often you will also come across descriptions of what should be done with the window reveals or what to look out for. However, it is not always clear what these reveals are.
Window reveals and lintel
A complete one window consists not only of the frame with the panes.
- You can get a good look at window reveals if you have the opportunity to get one shell consider. Before the windows are installed, you can see the cut-outs for them in the walls. However, these holes in the masonry are not yet the window reveals. They are just openings in the wall.
- The part of the wall that borders the hole for the window installation is the reveal. What is meant is the inner surface of this wall, from which you can also easily see the wall diameter.
- The determination of the reveal goes even further in detail. Not all four sides of this excerpt count. The wall surface above the window is the lintel. It can hardly be distinguished from the window reveal later on, but it must be created according to special rules. The reason is that the wall surface has to absorb the load from above over a hole. In the past, a wooden beam was often used there, today it is usually a concrete lintel.
Side surfaces are cold bridges
In the case of the built-in window, the window reveals are plastered or covered with plasterboard. This often invites careless work when installing windows and the reveals in the outer and inner walls become frequent sources of construction defects.
If there are thermal bridges at component transitions, this has a higher energy consumption ...
- Do the window reveals feel very cold, even though you heat enough and the windows themselves from? are of good quality, a gap between the window and the reveal can hide behind the cladding.
- It is customary to work with construction foam between the window frame and the reveal. This closes the installation joint, but should not be wider than one centimeter.
- If you already have the building find that the craftsman is generously filling a wide area with construction foam, a cold bridge is being built into you. This will drive up heating costs. So immediately insist on a professional one Assembly.
- Moisture and mold in the corners of the window reveals are also signs that a defect has crept in somewhere. You will have to expose the soffits to discover and fix it.
The best windows are of little use if the reveals are not carefully worked.
How helpful do you find this article?
