Attach the Logitech Z906 with the wall bracket
The fact that you have purchased the Logitech Z906 system shows that it tastes very good. You can set up this system with the enclosed wall bracket.
Setting up the Logitech Z906 requires patience
- Since you have already made a good choice in purchasing a Logitech z906 system with speakers, you should hang this system right away on the wall, because the wall bracket is an additional unit included. However, you should measure your wall correctly for the wall bracket in order to reproduce the result of the loudspeakers as faithfully as possible.
- First of all, you should determine the right choice of location and the appropriate wall, because there should not be any false vibrations. If possible, the wall should be free for measuring and attaching the wall bracket and the Logitech Z906 speakers. Then first find the center of the wall by dividing the measured length by 2.
The wall bracket makes the sound perfect
- Now take the middle of the wall and make a small line at 100 cm above the floor. This is also the center of the wall mount.
- You measure the exact distance between the holes and first attach the wall bracket.
- If possible, the subwoofer should be placed directly above or below the system in order to produce the best possible sound. The speakers in the front section should be approx. 150 cm from the wall at a height of 1.50 meters to the right and left of the system.
- Since the main speakers are quite heavy, the speakers should be attached using dowels and hooks.
- If possible, set up the rear speakers at the same distance so that you have optimal surround sound.
- Now all you need to do is put the Logitech Z906 with the wall bracket into operation and you can have a wonderful listening experience.
Build wall brackets for TVs - this is how it works
You have little space in your bedroom, but still want a TV with ...
How helpful do you find this article?
