Construction plan for a do-it-yourself snow plow
Anyone who has ever put together a closet knows how useful a blueprint can be. This does not only apply to cupboards, but can also be a good aid for a snow plow, for example. However, it can also be done without a plan if you only have a little manual skills at the start.
What you need:
- 1 x hacksaw
- 1 x steel pipe
- 1 x round bending machine
- 1 x internal thread cutter
- 1 x external thread cutter
- 1 x sandpaper
- 1 x welding machine
- 1 x metal paint spray
- 1 x color varnish
- 1 x rubber handle
Make a snow plow without a blueprint
For the snow plow without a blueprint, you need stainless steel sheet, which you can bend to fit. Then you need the right bracket to attach the handle. You will then need a little more paint to give the snow clearing device an attractive appearance.
- The main part of your snow plow, which you will make without a blueprint, is a 2 mm thick, 80 cm x 80 cm, sheet steel. This steel sheet is slightly rounded on one long side with a round bending machine. Then grind the material on the rounded edge in a width of one centimeter conically from 2 mm thick to 0.5 mm thick.
- Next, cut a 20 cm long iron pipe with a diameter of 3 cm. The tube has a material thickness of 1 mm. Cut an internal thread into this pipe, which will later be used to screw in the handle of your snow plow.
- In order to be able to screw in the stem, you first have to cut it to size. So take a suitable counterpart for your 20 cm pipe and cut it to a length of 150 cm. Then cut a 10 cm long external thread into the material at one end of the pipe.
The clearing device is painted
- After you have then welded the 20 cm pipe on the non-rounded long side, you can paint the snow plow, which you have now built without a blueprint.
- Before doing this, however, you should sand the entire part, including the handle, with fine sandpaper. When that's done, use cans of paint to spray a layer of metal paint.
- If you want to give the sign an additional visual upgrade, you can then apply a layer of colored lacquer. At the end of the handle you attach a rubber handle that you bought in advance at your trusted hardware store and then finish your work.
Loft bed - blueprint for a bed under the ceiling
If you are in the mood for unusual furnishing ideas, a loft bed should ...
At the paint You should wear a face mask for your snow plow.
How helpful do you find this article?