Renovation of old buildings: restore old wooden windows

instagram viewer

The renovation of old buildings is about preserving as much as possible and also using the original materials to restore the old windows. This work is definitely worth it, because an old building has a special charm.

Old windows can be restored.
Old windows can be restored.

What you need:

  • Grinding machine
  • Sandpaper
  • stain
  • Window putty
  • Wood paste
  • spatula
  • Wood colors
  • screwdriver
  • knife

Old window the end wood can be refurbished very easily in the context of an old building.

Tools and material for renovating old buildings

  • Depending on how badly the wood has been attacked, you will need several tools and aids. You can remove old colored lacquer with stain or sand it off with a grinding machine. The latter is more advisable, as the stain often attacks the wood even more.
  • The panes are usually inserted and sealed with window putty. You must also remove this old mass. This works very well with a small spatula, a screwdriver and a knife.
  • The window handles can be preserved if they are not broken. Remove the handles and clean them with an appropriate agent.
  • If the panes are broken, you can measure them and have the glazier cut new panes, which you can then insert into the restored frames. This is how you can easily renovate old buildings step by step.
    • Renovating wooden windows - instructions

    If you still have old wooden windows in your apartment or house, or even ...

Correctly restore the window

  • Carefully unhook the window and lay it on the floor. As a protection, you should get an old one ceiling put underneath.
  • Paint that is already loose and chipping can be removed just like that. The remaining paint can now be removed with an electric grinder or you can use conventional sandpaper.
  • Then the old putty is completely removed from the joints. Be very careful not to damage the wood any further.
  • Now the wood is completely free from the frame. Areas that are damaged there, or if there are holes and chips in the frame, then even these out with a special wood paste.

The new coat of paint

  • Before you continue with the renovation of the old building, sand the entire frame again. Fill the joints with new window putty and let it dry well.
  • Now you can paint the frames again. To do this, you can use a colored lacquer that is made for wood or you can use a clear lacquer. The wood look is retained and the frame only gets a protective layer through the transparent varnish.
  • Apply the varnish thinly with a paint roller and let it dry well. Then repeat this step and you can hang the window again as soon as the paint is completely dry.

Only then attach the handle and you can successfully complete the renovation of the old building.

How helpful do you find this article?

click fraud protection