How do I find a water vein for a well?
Fountains are especially popular with homeowners. It couldn't be easier to obtain water than from an appropriate water source in your own garden. In addition, these are already available in a large selection and for this reason a beautiful ambience can be conjured up. Nevertheless, the conditions should also be right, because a well cannot be built easily everywhere. For example, it is not easy to find a suitable water vein. Here you will find a few suggestions on what you should consider when building a well and how you can best attach the well.
What you need:
- Fountain
- Well drill
- pump
- drill
Suitable place for a fountain
- Of course, a well must not be placed at the highest point on the property. Groundwater in flat areas usually forms a kind of lake underground. This means that the water is always the same distance from the earth's surface.
- Of course there can be a few deviations, but this is more of an exception. It looks a little different in the mountains. A well should always be drilled towards the valley as far as possible. Then the water meets and emerges through a stream.
Easily find water veins
The water abundance also plays a decisive role. A hole is drilled in the earth with a ram filter. This reaches a maximum depth of 10 meters. The layers mainly consist of gravel, sand, loam, clay, sea silt, peat and bog. These are structured in a similar way to a cake.
- To find a suitable water vein for a well, you can first ask your neighbors. Maybe someone already has a well in the area. If this is not the case, it is possible to call the water supplier. This can sometimes provide information if there is a groundwater level network.
- Anyone can borrow a drill for the well privately. Then a test drilling can simply be carried out. If no water flows after ten meters, you can try again at another point. If there is also no water, then the groundwater level is far too low.
Your own fountain in the garden not only looks chic - it also ensures that ...
Drill the well hole correctly
- If you want a well, you shouldn't just drill into it. It is important to ensure that the drill is always held vertically. In addition, the device is moved and operated with muscle power. This sometimes takes a lot of strength.
- The tip of the screw must sit exactly in the middle of the hole in front of the drilling and you can start slowly. Finally, the return valve is activated and the drill can be removed again. Finally, you put the fountain around the hole for decoration. These can be bought ready-made or you can make them yourself with the appropriate stones.
- In addition, a pump can be attached, which simply transports the water upwards. Thus the well is complete.
How helpful do you find this article?
