Fit the pool liners correctly

instagram viewer

Pool inner linings are made of PVC films that are stretchable, UV-protected and frost-resistant. However, external influences such as undissolved chlorine products or sharp objects can damage the film. With the help of practical instructions, you can apply the new swimming pool liner yourself.

Attach your pool inner liner yourself.
Attach your pool inner liner yourself.

What you need:

  • Indoor pool liner
  • Clothespins
  • fleece

How to assemble pool liners for round pools

Always attach pool liner without shoes, preferably on socks.

  1. Remove all sharp objects from your clothing and the pool.
  2. Make sure that the pool floor is free from unevenness before inserting pool liners.
  3. Now unfold the foil at the bottom of the pool and then pull the foil wall upwards.
  4. Now place the welded edge profile over the edge of the steel jacket and fix it around every 50 centimeters with clothespins. Do not use the handrail for this, as you run the risk of damaging the pool liner by correcting it.
    5. Repairing pool liner - this is how you mend holes

    When the swimming pool is to be built for the summer, you sometimes find that ...

Attach the swimming pool liner correctly

The correction takes place after the pool inner linings have been attached.

  1. To do this, carefully smooth the film on the floor and walls, because a perfect fit and wrinkle-free fit is particularly important for the pool inner linings.
  2. The swimming pool liner must be pulled into the throats at the bottom so that the weld seam is flush with the outer circumference.
  3. Then pull the wall film vertically upwards and make sure that there are no diagonal creases.
  4. It is important that the distance between the bottom weld and the pelvic valley is the same all around.
  5. Only then do you remove the clothespins from the steel frame jacket and mount the handrail.

Do not start sealing the fixtures before the water pressure has pushed the pool liners into the throat. You can then completely fill your pool. Remain in the basin at the beginning of the filling process, because the foil can still be corrected up to a water level of three to five centimeters.

How helpful do you find this article?

click fraud protection