Use the electric tiller correctly
Would you like to use an electric tiller and know more about these practical devices? Then find out here how you can make the sweaty digging up of heavy soil much easier.
Garden tillers, also known as tillers or tillers, make gardening easier and can be used to dig, plow or chop heavy soil. In the meantime, electrical devices have established themselves among many hobby gardeners for private use as well. With an electric tiller, there are a few things to consider in order to avoid accidents and to work with it in the garden without any problems.
How to Use Electric Tillers Properly
- Electric garden tillers are equipped with a chopping shaft on which there are a number of knives. This chopping shaft is driven by the electric motor. Make sure you have very good shoes to protect your feet and to have a good grip at work.
- The electric tiller cuts the solid ground, then it is chopped up and is then loosened and well prepared for sowing or other work. Make sure to wear protective goggles when working so that whirling stones cannot injure your eyes.
- You have to adjust the height of your tiller in order to adapt it to your body and to the respective work and soil conditions. Correctly set heights of both the hoe shaft and the handlebar make gardening easier and protect your back.
- Wear non-slip work gloves that give your hands a firm grip on the handlebar.
- When using the electric tiller, make sure you always pay attention to where the cable is so that you don't cut it in the middle of your work.
- This works best if you don't work alone and use someone as a “cable keeper”.
- Electric hoes usually have a low noise level compared to gasoline-powered devices, but should nevertheless You wear hearing protection, because scratching the knife on stones can be harmful to your hearing in the high frequency range be.
If you are working with a chainsaw for the first time, you should first look at smaller ...
Good electric milling machines are often expensive. You can also borrow these devices from garden centers or hardware stores or from specialist dealers. When choosing the device, keep in mind that an existing reverse gear saves a lot of work. You should also know that motorized milling machines with a rechargeable battery do not perform well. A direct power supply is much better.
